We buy all the products we test — no freebies from companies. If you purchase through our links, we may earn a commission, which helps support our testing.
The Berkey water filter, a stylish countertop solution, seamlessly blends with any kitchen aesthetic. Its contaminant removal capacity is average, effectively eliminating chlorine, fluoride, copper, and lead, yet struggles with iron and sulfate. The filtered water's taste is average and didn't impress in blind taste tests. With an easy setup and maintenance process, it offers a convenient alternative to traditional pitcher filters. Overall, the Berkey suits most households looking for an alternative to pitcher water filters. To find better options, check out our top-ranked water filters.
REASONS TO BUY
Lots of water storage
Simple design
REASONS TO AVOID
Expensive
Specific placement
Challenging to fill
Berkey Sizing Scheme
The Berkey comes in several different sizes.
Travel Berkey - 1.5 gallons
Big Berkey (tested here) - 2.25 gallons
Royal Berkey - 3.25 gallons
Imperial Berkey - 4.5 gallons
Crown Berkey - 6 gallons
All sizes utilize the same filtration system. Though we tested the Big Berkey for our review, our affiliate links point to the Royal Berkey, which is one of the most popular sizes and suitable for a 2-6 person household.
While the popular water filter system looks stylish, its performance and taste did not live up to the hype
If you have space and are willing to install a one-time system, this is the best way to purify your water
Top-notch filtration and convenience at an affordable price point
A low-cost pitcher that easily produces high-quality water
Reduced installation hassle, comparable filtering power, and lowest yearly cost
Rating Categories
Berkey
iSpring RCC7
ZeroWater 10-Cup 5-...
PUR Classic 11 Cup...
APEC WFS-1000
Contaminant Removal(60%)
8.5
10.0
10.0
8.3
8.4
Taste(30%)
6.9
7.9
6.6
9.0
7.9
Setup and Use(10%)
6.7
6.5
8.1
8.4
8.1
Specs
Berkey
iSpring RCC7
ZeroWater 10-Cup 5-...
PUR Classic 11 Cup...
APEC WFS-1000
Model
2.5 gal
RCC7
10 Cup
11 Cup
WFS-1000
Replacement Schedule
6,000 gallons, that equals to be approximately two to five years
Stage 1 - 3 every 6 months
RO every 2 - 3 years
Post carbon every 12 months
18,000 mg of dissolved solids; 1-40 gallons
2 months or 40 gallons
Every 12 months
Replacement Cost
$166 for set of Black Berkey filters
2 year supply for $100
2 for $30
4 for $40
8 for $90
12 for $115
16 for $150
$24 for a 4 pack
Stages 1-3 for $40
Type
Countertop single stage filter
Reverse Osmosis
Pitcher
Pitcher
3 Stage under sink
Pure Water to Waste Water Ratio
N/A
2:1
N/A
N/A
N/A
NSF/ANSI certified
N/A
N/A
5-stage Ion Exchange water filtration is NSF Certified to reduce PFOA/PFOS, Lead & Chromium
Tested and certified by NSF to reduce chlorine, mercury, copper, zinc and other chemical & physical substances.
NSF Certified filters and tubing
Follows NSF/ANSI or other cert
N/A
In strict accordance with American quality standards. Certified to NSF/ANSI 58
N/A
N/A
N/A
Measured Chlorine Removal
88%
100%
100%
95%
100%
Measured Fluoride Removal
100%
100%
100%
100%
100%
Measured Sulfate Removal
30%
100%
100%
35%
39%
Measured Copper Removal
100%
100%
100%
88%
100%
Measured Iron Removal
79%
100%
99%
85%
46%
Measured Lead Removal
100%
100%
100%
100%
100%
Measured Annual Cost
$83.00
$50.00
$57.50
$36.00
$40.00
Show full specification detailsHide full specification details
Our Analysis and Test Results
The Berkey is a departure from a pitcher water filter. It resembles a Kilner jar and sits on a countertop or a decorative pedal stool. The sleek stainless steel aesthetics help complement the style of your kitchen, whether you have a modern or rustic design. While this filter is decently fast, you can add more to speed up water filtration.
Performance Comparison
The Berkey allows instant access to filtered water with its gravity-fed design.
Credit: Abriah Wofford
Contaminant Removal
Water filters are popular for consumers who are rightfully concerned about water quality and taste, so choosing a filter that can effectively remove contaminants is important. To test the effectiveness of different water filters, we made a sample containing large amounts of chlorine, iron, sulfate, lead, fluoride, and copper. We sent the purified water samples off to Western Environmental Testing Laboratories for analysis. The Berkey underperformed the hype associated with the model as its results were average compared to the rest.
The model removed 88.33% chlorine, 100% fluoride, 30.43% sulfate, 100% copper, 79.37% iron, and 100% lead. Of these scores, only iron and sulfate remained above the standard for acceptable water quality. This filter should provide adequate filtration power for most household and municipal water sources. Other filters will better suit your needs if your local water is particularly high in iron or sulfate.
The model can support up to four filters to increase speed and filtration power. These filters can produce up to seven gallons per hour.
Credit: Abriah Wofford
Taste
If your tap water has an unpleasant chlorine or iron taste, a water filter can help to improve this. Taste is subjective; everyone will have different preferences. Some people prefer a mineral taste, while others prefer a neutral taste. To help describe and test the taste, our office team participated in a blind taste test.
The Berkey delivers neutral water, receiving average ratings from our testing team. Its online community flaunts the improved taste over regular tap water, testifying to its ability to enhance water quality. However, despite these accolades, it didn't distinguish itself in our blind taste test.
The model will improve the taste of municipal water sources. Our team felt the taste was pretty average when compared to other filters.
Credit: Abriah Wofford
Setup and Use
Different water pitchers offer different user experiences, both in setup and ongoing use. Factors to consider include installation procedures, daily use, long-term maintenance, and overall cost. Our test team installs and prepares each filter and then evaluates the setup process and overall user experience. For this metric, we analyze the yearly cost, day-to-day use, and maintenance. The Berkey takes around 30 minutes to set up, has standard maintenance requirements, and has a moderate annual cost.
The Berkey doesn't require any technical skill, but you do need to prime the filters for installation. Priming the filter uses the included rubber adapter to connect the faucet and filter to flush it out. Fortunately, it is a smooth and easy process. It follows standard maintenance procedures, requiring the filters to be changed and then primed every 6000 gallons. The annual cost is higher than a pitcher model but less than other types that use multiple filters. The annual cost of this model is $83 and comprises the replacement filters, which have an impressive life span.
The Berkey is a stylish addition to any kitchen.
Credit: Abriah Wofford
Should You Buy the Berkey?
This model is great if you are tight on fridge space or want a convenient and stylish water filter option. It is, however, quite expensive upfront, given the overall filtration performance and space requirements.
What Other Water Filters Should You Consider?
If you are looking for easy access to water without taking up any fridge or counter space, then look at an under-the-sink water filter like the APEC WFS-1000. It has the smallest footprint of any under-the-sink model due to its tankless design and smaller filter set. But, if you're in need of a water pitcher that can remove nearly 100% of all contaminants, we recommend the ZeroWater 10-Cup 5-Stage Pitcher.
